Overview

TP-Link TL-WA801N 300Mbps Wireless N Access Point

Overview 

The TP-LINK Wireless N Access Point TL-WA801N is designed to establish or expand a scalable high-speed wireless N network or to connect multiple Ethernet-enabled devices such as game consoles, digital media adapters, printers, or network-attached storage devices to a wireless network. The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or any other applications that you may wish to use.

Wireless N – Speed & Range 

Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through two antennas to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!

Multiple Operating Modes – Easy To Build WLAN

Supports multiple operation modes (Access Point, Multi-SSID, Client, Range Extender) to enable various wireless applications to give users a more dynamic and comprehensive experience when using their APs. Multiple operating modes also help you easily build wireless network for hard-to-wire locations or eliminating wireless dead zone.

Passive PoE Supported – More Flexible Deployment – The TL-WA801N is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.

Features

Interface –
1× 10/100Mbps RJ45 LAN Ports,
Support Passive PoE

Button – Power On/Off Button, WPS Button, Reset Button

External Power Supply – 9VDC/0.6A

Antenna Type – 2x Fixed Omni-Directional Antennas

Wireless Sensitivity –
11g 6Mbps: -90dBm
11g 54Mbps: -77dBm
11n HT20 MC7: -73dBm
11n HT40 MC7: -70dBm

Wireless Standards – IEEE 802.11ac/n/a 5GHz, IEEE 802.11b/g/n 2.4GHz

Signal Rate – 300 Mbps at 2.4 GHz

Wireless Security – WEP, WPA/WPA2, WPA/WPA2-PSK encryptions

Transmission Power – CE: <15dBm, FCC: <20dBm

Wireless Modes –
AP Mode
Multi-SSID Mode
Client Mode
Range Extender Mode

Wireless Functions – Enable/Disable Wireless Radio, WMM, Short GI, AP
Isolation, Wireless Statistics, Throughput Monitor

Quality Of Service – WMM

Management – SNMP

Advanced Functions – Up to 30 meters Passive PoE is supported

Dimensions (W x D x H) – 181.6 × 129.5 × 36.2 mm

Warranty – 36 Months

What’s Included

1x TP-Link TL-WA801N 300Mbps Wireless N Access Point
1x Passive PoE Power Injector
1x RJ45 Ethernet Cable
1x Power Adapter
1x Quick Installation Guide

Downloads

Datasheet

Support Page